Reservoir-Topside Integrated Assessment of Dedicated CO2-Rich Gas Injection in a Brazilian Pre-Salt Benchmark: Displacement Mechanisms and Field Performance

Managing CO2 in offshore oil production is critical for both environmental and operational objectives, particularly in Brazilian pre-salt reservoirs where high CO2 content coexists with significant natural gas volumes. Reinjection strategies are widely employed to maintain reservoir pressure, enhance oil recovery, and minimize flaring. In this work, an integrated reservoirtopside modeling framework is proposed to realistically evaluate CO2 injection strategies, accounting for fuel gas, gas export, and reinjection flows. This study evaluates the effects of a dedicated well for CO2-rich gas injection compared with conventional reinjection of natural gas mixed with CO2 spread among all injectors. Two complementary case studies were conducted: (i) a simplified injector-producer pair to isolate fundamental displacement and thermodynamic mechanisms, and (ii) a field-level strategy with ten producers and ten injectors to assess the impact of dedicated CO2 injection on production and economic performance under three geostatistical scenarios. Results from the simplified strategy demonstrate that CO2-rich injection improves microscopic displacement through oil swelling and interfacial tension reduction, while modifying pressure profiles and sweep behavior. In the developed strategy, dedicated CO2 injection strongly depends on injector location, geological heterogeneity, and injector-producer connectivity. Overall, the results highlight dedicated CO2-rich injection as a promising parameter for optimizing production strategy, with potential for improving oil recovery, and enhancing field management. The study demonstrates that strategic allocation of CO2 injectors can significantly influence displacement efficiency, sweep behavior, and economic performance in heterogeneous offshore reservoirs.

Ensemble-Based Production Strategy Selection for a Stochastic Gradient Method with Well Number and Priority Control Vectors

Decision-making in uncertain scenarios with a large number of decision variables (i.e., control vectors in mathematical formulations) is complex. Open-source simulation and optimization tools can assist with these decisions. However, establishing guidelines is important to reduce computational demand, prevent suboptimal decisions, and, consequently, improve oil recovery and economic return. This work aims to define a practical procedure for tuning the parameters of the optimization algorithm and selecting an ensemble-based production strategy for a stochastic gradient method with decision variables of well number and priority. The number of simulation runs, the stochasticity of the optimization algorithm, and the performance of the procedure are also analyzed during the evaluation. We consider reservoir, geological, operational and economic uncertainties using an ensemble of simulation models and economic scenarios from a public-access synthetic reservoir benchmark case featuring Brazilian sandstone (named UNISIM-I-D). We reparametrized the optimization algorithm (named Stochastic Simplex Approximate Gradient (StoSAG)), which is formulated for continuous variables (e.g., well production and injection rates), for commonly used discrete and binary variables. Consequently, we adapted the well priority for well placement selection, defining candidate well’s positions with a quality map and ranking wells at the start of the process based on the Well Economic Indicator (WEI). The well number and priority decision variables are optimized simultaneously using the robust ensemble-based optimization approach. The optimization algorithm’s parameters (i.e., initial guess, perturbation number, and perturbation magnitude) are tuned using an 8-step assisted procedure subdivided into two decisions. During robust ensemble-based optimization, the Objective Function (OF) is the Expected Field Economic Indicator (EFEI). The results indicate that there is an inverse behavior between the perturbation magnitude and the approximate gradient, provided that both control vectors are tuned in the same direction (ascending or descending) and the other parameters are kept, which is useful for tuning parameters. The optimal strategy achieves a 24.9% increase in economic return compared to the worst strategy. These strategies are obtained only during the 2nd decision, which considers the complete optimization process. Thus, this decision-making procedure is useful for avoiding suboptimal production strategy selection caused by an inappropriate parameter setting. In addition, this work establishes guidelines for selecting an ensemble-based production strategy for a stochastic gradient-based technique with well number and priority decision variables, which also allows: (1) selecting well placement based on well priority, (2) reducing computational demand by proposing steps for setting parameters, (3) improving decision accuracy during oilfield development and management, (4) providing insights that can be applied to a variety of problems (e.g., model-based production strategy selection, other decision variables), and (5) automating processes.

Impact of Silicification on the Pore System of Pre-Salt Lacustrine Carbonates

Carbonate reservoirs are characterized by highly heterogeneous pore systems that span multiple scales, from microscopic pores to field-scale features. Post-depositional alterations associated with fluid interactions, such as hydrothermal alterations, metasomatism, and dissolution, play a significant role in controlling porosity in carbonate reservoirs, which are known for their dual porosity, associated with both matrix and nonmatrix porosity.
In the pre-salt carbonate reservoirs of the Barra Velha Formation, silicified intervals significantly impact reservoir properties. Recent studies suggest that silica is closely associated with non-matrix porosity features, such as vugs, gigapores, and fractures, which can contribute to zones of high permeability. Silica may occur as a replacement phase or as pore-filling cement, drastically altering the reservoir’s flow properties. These intervals, however, challenge traditional petrophysical evaluations, as routine core analyses (RCA) and nuclear magnetic resonance (NMR) often fail to adequately capture the connectivity and flow characteristics of these non-matrix features.
This study investigates the relationship between pore types and the occurrence of silica in lacustrine carbonates of the pre-salt Barra Velha Formation, located in the Santos Basin. Using Digital Rock Analysis (DRA) techniques, including computed tomography (CT), integrated with petrography and descriptive core analysis, we evaluate pore types and their relationship with silicified intervals.
The multiscale classification of pore types included thin sections, micro-CT, and CT scans at the core scale, enabling the identification of the diversity and distribution of pore systems across different scales. This is an ongoing study aimed at better understanding how silica affects the petrophysical properties of the reservoir, focusing on fundamental characteristics such as porosity and pore connectivity, and comparing these features with borehole image data.